Inside a Contract Lounge Chair Build

Lounge Chair Manufacturer – Inside a Contract Build

Inside a Contract Lounge Chair Build

This guide follows a single order through the workshop, using the Barcelona Chair LC-01 as the working example of how a lounge chair manufacturer turns a drawing into a frame, a foam pad and a packed carton. It also shows what to put in writing with a designer furniture manufacturer before a sample is approved — from the 50-degree high-density foam in the seat pads to the 300 lb load test behind the X-leg frame.

Barcelona

Buyer Due-Diligence Scorecard

Six checks that decide a contract order, with the document or sample to ask for at each one. Score an incoming quote against these before the order moves to production.

01

Sample approval

Ask for: a pre-production sample in your chosen cover, with the piping and stitch reference.

Seat feel and the straight piping lines are approved on a physical piece, not on a photo. Nothing goes into the run until that sample is signed off.

02

Frame and load

Ask for: the X-leg load test result and the frame drawing.

The LC-01 X-leg is tested to bear over 300 pounds without deformation. In a lobby or waiting area, that written figure is the only proof that the frame will not flex.

03

Foam specification

Ask for: a written density figure for the seat and back pads.

LC-01 pads use 50-degree high-density foam. Density decides how the seat recovers between guests and how long the pad keeps its shape.

04

Upholstery and finish

Ask for: cover swatches and a close-up of the polished stainless steel.

The LC-01 specification lists PU/Fabric + stainless steel, while the product description also refers to leather pads, so the cover is fixed at sample stage — not assumed from a paragraph.

05

Dimensions to drawing

Ask for: a dimensioned drawing of the chair and stool.

Chair 77 × 78 × 77 cm, stool 62 × 55 × 41 cm, hand-measured with a 1–2 cm difference accepted. Floor plans, lift sizes and door widths are checked against that sheet.

06

Packing and warranty

Ask for: the packing method and the written warranty terms.

LC-01 ships knock-down at 1PC/CTN, bubble wrapped inside a carton box, with a 1-year warranty. Knock-down cartons protect the polished frame; the warranty sets the service window.

Order-to-Delivery Timeline

Seven stages between a brief and a delivered carton. Each stage produces something the buyer can hold or file.

  1. 1

    Brief and drawing

    Share the venue, the quantity and the LC-01 reference, plus whether the order needs the stool alongside the chair.

  2. 2

    Sample and approval

    The cover, foam feel and straight piping are approved on a physical sample before anything is cut.

  3. 3

    Material confirmation

    Color code, PU / fabric / leather selection and the polished finish are locked into the order file.

  4. 4

    Production

    The curved stainless steel frame is built, the 50-degree foam pads are upholstered with straight piping, and the pads are fitted at the original angle.

  5. 5

    Quality check

    Load check on the X-leg, foam and stitching review, dimension check to the drawing, and a finish check on the polished steel.

  6. 6

    Knock-down packing

    Each piece is bubble wrapped and closed in a carton at 1PC/CTN, with the knock-down frame protected inside.

  7. 7

    Documents and after-sales

    The price list and quote go out by email, and the 1-year warranty covers the delivered pieces. Timing for each order is confirmed with sales.

Barcelona Chair LC-01 specification view of the chair and stool

LC-01 Build Snapshot

The numbers below are the ones a specifier, buyer or procurement officer will need on file. Use them as the reference deck for the Barcelona Chair and its matching stool.

Reference No. LC-01
Style Italian Classical Minimalism
Chair size 77 × 78 × 77 cm
Stool size 62 × 55 × 41 cm
Material PU/Fabric + stainless steel
Foam 50-degree high density
Finish Polished
Packing K/D, 1PC/CTN
Warranty 1 year
Price shown $223.00
Scene use Home, office, villa, club, mall, hotel
Barcelona Chair LC-01 frame and pad detail

Frame, Foam and Finish: What Gets Specified

Three construction elements carry most of the risk on a lounge chair order. Each one has a concrete fact attached, and each one becomes a line on the purchase order.

  • The X-leg frame

    A curved stainless steel solid frame carries the chair on an X-leg base tested to bear over 300 pounds and resist deformation. Specify the load figure in writing when the chair is going into a public seating area.

  • The two pads

    Two rectangular pads form the seat surface and the backrest, following the original curly angle. They are built from 50-degree high-density foam with straight piping and hand craft — the density and the piping line are the two details to approve on the sample.

  • The polished finish

    The frame is finished in a polished treatment, and colors are listed as multiple and optional. Decide the sheen and the color together on a swatch, not separately from a catalog photo.

  • The design lineage

    The piece was designed by Mies van der Rohe and Lily Reich, is tied to the 1929 Barcelona World Expo, and is described as a classic modern design collected by multiple museums. That line is often reused in FF&E specification documents for lobbies and showrooms.

Quality Control Checklist

What an inspection should return on a Barcelona Chair LC-01 order. Use the third column as the acceptance line on the inspection report.

Barcelona Chair LC-01 quality check detail
Check Ask for Confirm
Foam Density statement for the pads 50-degree high-density foam before the cushion is closed
Frame Load test record X-leg holds over 300 lb without deformation
Upholstery Cover swatch and stitch sample PU, fabric or leather fixed on the approved sample
Piping Pad close-up at the seam Straight piping line runs true along both pads
Finish Polished steel photo in daylight No marks or dull patches on the frame
Dimensions Measuring tape against the drawing 77 × 78 × 77 cm chair and 62 × 55 × 41 cm stool within the 1–2 cm tolerance
Packing Carton photo with the label K/D at 1PC/CTN, bubble wrap inside the carton box
Warranty Written terms on the quote 1-year cover stated on the order documents

Because the specification table lists PU/Fabric + stainless steel while the product description also refers to leather pads, the cover is confirmed at sample stage on every order.

Customization and Packing Matrix

The variables a buyer can actually choose on an LC-01 order, and the point at which each one is fixed.

Variable What is available When it is fixed
Cover PU or fabric over stainless steel per the specification, with leather discussed at sample stage On the approved sample
Color Multiple and optional Against the approved swatch
Finish Polished On the sample, checked again at quality check
Order mode Regular specification, with ODM/OEM customization offered on covers and colors At brief stage, before sampling
Packing Knock-down, 1PC/CTN, bubble wrap and carton box At order confirmation, including carton marking
Warranty 1 year On the quote

Quantity thresholds and delivery timing are set per order and depend on the cover and color mix — contact sales to confirm both for your combination.

Barcelona Chair LC-01 cover and finish options

Scenario-to-Specification Decisions

Five venues, the LC-01 fact that carries each one, and the decision to close before the order is signed.

Barcelona
Venue LC-01 fact that applies Decision to close
Hotel lobby and club lounge X-leg tested over 300 lb, 50-degree foam, 1-year warranty Approve cover and confirm the load figure on the order
Corporate lobby and law firm reception Chair footprint 77 × 78 × 77 cm, polished stainless steel Check the chair-and-stool pair against the reception drawing
Showroom and retail display 1929 design lineage, two-pad construction with straight piping Lock the finish and the design story used in the specification
Villa and home library Chair plus stool set, PU/fabric cover, multiple colors Choose the cover for comfort and maintenance, not only for looks
Mall and club seating area Knock-down 1PC/CTN carton, bubble wrap, polished frame Confirm carton handling and storage on site before dispatch

The chair suits home, office, villa, club, mall and hotel settings. Where a venue needs a cover that is not on the sample, ask sales before the order is placed.

Request a Full Price List

Send the venue, the quantity, the cover you prefer and whether the order includes the stool. The reply comes back as a price list and a quote rather than a cart checkout, so quantities and custom covers can be priced together.

Related Reading

Three notes to help clarify product requirements before contacting the supplier.

What Makes a Barcelona Chair Style Leather Lounge Chair?

A Barcelona Chair style leather lounge chair is recognized by its armless seat, rectangular pads, and X-leg frame, while the style name points to design history and visible cues rather than official…

Read article

High-Resilience Foam and Density in Leather Lounge Chair Cushions

High resilience and high density describe two different foam properties, and separating them is what turns a phrase like 50 degree foam into something a buyer can actually judge.

Read article

How to Shortlist a Lounge Chair Manufacturer for Hotel Lobby Projects

Hotel lobby lounge chair projects need early clarity on specifications, samples, delivery, and compliance communication before a manufacturer is shortlisted.

Read article

Frequently Asked Questions

what are the barcelona chair and stool dimensions?

the chair measures 77 × 78 × 77 cm and the matching stool measures 62 × 55 × 41 cm. dimensions follow the drawing and are hand-measured, so a 1–2 cm difference is acceptable.

how strong is the lc-01 x-leg frame?

the chair is supported by a curved stainless steel solid frame with an x-leg base. it is tested to bear over 300 pounds and resist deformation, and the frame has a polished finish.

what foam and cover are used on the seat and back pads?

the seat and back use two rectangular pads made with 50-degree high-density foam, straight piping and handcraft, following the original curly angle. the specification lists pu/fabric + stainless steel, while the product description also refers to leather pads; confirm the final cover on your approved sample.

what design history is associated with the barcelona chair?

the barcelona chair was designed by mies van der rohe and lily reich to welcome the king and queen of spain, and it is associated with the 1929 barcelona world expo. it is described as a classic modern furniture design collected by multiple museums.

what customization options are available for lc-01?

lc-01 is offered with multiple colors and optional finishes, plus odm/oem customization that includes leather options and colors. cover, color and finish are confirmed at sample stage.

how is the barcelona chair packed, and what warranty is included?

each piece is packed knock-down at 1pc/ctn, with bubble wrap and a carton box. the barcelona chair lc-01 carries a 1-year warranty.